Parts-HQ is a market leading supplier of replacement parts for a diverse range of products – from consumer electronics and appliances. Through distribution facilities strategically located throughout the world, Parts-HQ supplies new, refurbished exact and compatible alternative parts for nearly 200 top manufacturer brands. With the largest multi-vendor parts inventory in the industry, we provide access to 8+ million parts in our database, helping to ensure you get the parts you need, when you need them.

Filters

Clear All
Price
to

Less than $25

$25-49.99

$50-74.99

$75-99.99

Over $100

Hewlett-Packard (HP) DesignJet 220 (D-size) Printer Parts

Model Number Finder

Shop for Your Specific model to find parts that fit
  • Showing 283 Product(s)
C3180-40013 - Bracket for Bail Switch Assembly
$ 57.70 21205 Installed to the right side Plate of the plotter On Sale

Installed to the right side Plate of the plotter

Save $ 18.22
Was 75.92
C1633-20034 - Bushing for Reduction Pulley
$ 7.76 20326 Bushing for reduction pulley On Sale

Bushing for reduction pulley

Save $ 2.45
Was 10.21
C2847-40015 - CAM Gear Support
$ 82.23 21062 Supports bail lift cam gear Mounted on Y-tensioner bracket (part of the bail lift mechanism kit) On Sale

Supports bail lift cam gear Mounted on Y-tensioner bracket (part of the bail lift mechanism kit)

Save $ 25.97
Was 108.20
C3192-60001 - CROSS-BRACE
$ 192.03 21270 Brace that connects and supports the two stand legs On Sale

Brace that connects and supports the two stand legs

Save $ 60.64
Was 252.67
C3186-00034 - CROSS-BRACE (Brace That Connects and Supports the Two Stand Legs)
$ 101.87 21237 Brace that connects and supports the two stand legs On Sale

Brace that connects and supports the two stand legs

Save $ 32.17
Was 134.04
C3185-00034 - CROSS-BRACE (Brace That Connects and Supports the Two Stand Legs)
$ 114.42 21236 Brace that connects and supports the two stand legs On Sale

Brace that connects and supports the two stand legs

Save $ 36.13
Was 150.55
C1633-60120 - Carriage Assembly (Includes Carriage PC Board)
$ 50.17 20353 Includes carriage PC board On Sale

Includes carriage PC board

Save $ 15.84
Was 66.01
C2847-60071 - Carriage Assembly Includes Carriage PC Board
$ 605.47 21076 Can be used on any plotter that has firmware ROMS of version 3.3 (WARNING DAMAGE CAN OCCUR IF FIRMWARE VERSION IS NOT 3.3) On Sale

Can be used on any plotter that has firmware ROMS of version 3.3 (WARNING DAMAGE CAN OCCUR IF FIRMWARE VERSION IS NOT 3.3)

Save $ 191.20
Was 796.67
C2847-00029 - Carriage Belt
$ 385.22 21056 On Sale
Save $ 121.65
Was 506.87
1500-0693 - Carriage Belt
$ 43.34 26932 On Sale
Save $ 13.69
Was 57.03
C4713-40053 - Carriage Ink Cartridge Slot Cover
$ 6.64 21786 Carriage ink cartridge slot cover On Sale

Carriage ink cartridge slot cover

Save $ 2.10
Was 8.74
C3190-60145 - Carriage Motor Assembly (Includes Cable)
$ 195.79 21258 Carriage motor assembly On Sale

Carriage motor assembly

Save $ 61.83
Was 257.62
C3190-40042 - Carriage Motor Assembly (Includes Cable)
$ 195.79 88338 On Sale
Save $ 61.83
Was 257.62
24540-80010 - Centronics (Parallel) Cable
$ 26.16 13549 36-pin (M) to 25-pin (M) . 2.0m (6.6ft) long. Connects to HP Vectra and IBM PC AT XT compatibles On Sale

36-pin (M) to 25-pin (M) . 2.0m (6.6ft) long. Connects to HP Vectra and IBM PC AT XT compatibles

Save $ 8.26
Was 34.42
9170-1533 - Clamp (Holds Ferrite IN Place Within Electronics Enclosure)
$ 49.59 29509 Holds ferrite in place within electronics enclosure On Sale

Holds ferrite in place within electronics enclosure

Save $ 15.66
Was 65.25
C4705-60089 - Clutch/ Overdrive Gear Assembly
$ 74.66 21778 Includes gear, clutch, retaining clip, and two washers - Mounts above the cluster gear on the left side plate of the plotter On Sale

Includes gear clutch retaining clip and two washers - Mounts above the cluster gear on the left side plate of the plotter

Save $ 23.58
Was 98.24
1460-1940 - Compression Spring
$ 26.27 19964 302 stainless steel, passivity finish, 0.875in long, 0.36in OD, 0.026in wire diameter, 4.17 in lb rate. On pulley wedge, for carriage belt tension On Sale
302 stainless steel passivity finish 0.875in long 0.36in OD 0.026in wire diameter 4.17 in lb rate. On pulley wedge for carriage belt tension
Save $ 8.30
Was 34.57
C1633-80005 - Compression Spring
$ 8.21 20358 Installed between pincharm assembly and bushing On Sale

Installed between pincharm assembly and bushing

Save $ 2.59
Was 10.80
C1633-80014 - Compression Spring
$ 27.76 20360 For the rear bushing on the carriage On Sale

For the rear bushing on the carriage

Save $ 8.77
Was 36.53
1460-2139 - Compression Tensioner Spring
$ 57.70 26916 Stainless steel, passivity finish, 41.3mm long, 9.14mm OD, 42um wire diameter, 44.5 N mm rate Installed on shaft of tensioning wedge for carriage drive belt idler pulley On Sale

Stainless steel passivity finish 41.3mm long 9.14mm OD 42um wire diameter 44.5 N mm rate Installed on shaft of tensioning wedge for carriage drive belt idler pulley

Save $ 18.22
Was 75.92